ULTRASONIC ANTIFOULING
®
Shipsonic 10 
Coverage installed inside 
the hull up to about 10 
meter waterline length.
Shipsonic 40
Coverage installed inside 
the hull up to  about 40 
meter waterline length.
SHIPSONIC 20
One Amplifier – Two Transducers
A basic Shipsonic 20 unit kit consists of two Transducers connected to a single Control Box.
SHIPSONIC 10
One Amplifier – One Transducer
A basic Shipsonic 10 unit kit consists of a single Transducer connected to a single Control Box.

SHIPSONIC 40

One Amplifier – Four Transducers

A basic Shipsonic 40 unit kit consists of four Transducers connected to a single Control Box.

SHIPSONIC 30

One Amplifier – Three Transducers

A basic Shipsonic 20 unit kit consists of three Transducers connected to a single Control Box.

Mounting the transducer:

The transducer(s) should be placed below  the water line at the bottom inside the boat.

Make sure that you do not site the transducer on any false floor or internal skin.

It is very important that it is mounted on the actual external part of the hull (polyester).

A location within 1-1.5 meters of the propeller(s) or drive unit(s) will help to keep this clean within the effective area of the transducer.

In some situations it is more practical to use a combination of  f.e. 1x Shipsonic 10 unit together

with 1x Shipsonic 20 unit. Of course you can call or mail us to find the most practical and effective solution concerning the inside situation in you yacht.

More details...

More details...

More details...

More details...

Shipsonic 30

Coverage installed inside

the hull up to  about 30

meter waterline length.

Shipsonic 20

Coverage installed inside

the hull up to  about 20

meter waterline length.

See Installation Instructions: